Tag Archives: genuine gemstones

Another Cabochon wire wrapped

So my personal challenge continues,

I have finished the first cab, with swirls at the base although I chose not to add gemstones in the centre of the swirls, as Jan had done.

I am never going to reproduce exactly, nor to the standard the wire wrapping as the guest designers do, they have many more experience than I do, and to be honest more interest. I have said on many occasions I am a bead weaver at heart, I love tiny seed beads and am also working on a challenge to create 2 5cm x 5cm beaded squares. In fact Laura Binding, another JM Wirework Guest Designer frequently states that she can never replicate a design, she can show you how she got there, but as much of the designing is freehand, and the gemstones are all unique, you are never going to reproduce an exact copy. I think that is an important point to remember, especially if you get disheartened because a piece isn’t the exact image of a designers piece, its always going to be unique to you.

So, this is my second Cab, wire wrapped really quite simply using the square wire.

Differently wrapped Cab
Differently wrapped Cab

 

Pearl Cluster Necklace

Pearl Cluster Necklace
Pearl Cluster Necklace, created using silver plated wire, and the standard tiara twist this pendant was turned in to a necklace by the addition of silver plated chain, and clasp.

 

Notice the focal detail by the s hook clasp, an additional 3 pearls, simple additional feature which just adds a small amount of detail at the rear of the piece instead of all focus being at the front.

 

 

 

 

Simple Instructions for replication ….

Take a strand of Pearls

0.40mm Silver Coloured Wire (about a metre)

Silver Plated Chain, Jumprings, HeadPin, and Clasp of your choice

 

Take a couple of pearls on the wire, and begin to form spiral, twist the wire as you form a spiral and add pearls gently, so not to strain the wire. Be random, feed the wire in and out of the shape already formed until you have a sizeable pendant.

Neatly finish the wire off!

Cut two chains for the necklace, this really depends on how long you want the necklace to be, ranging from choker to naval the decision is yours!

Using a couple of jump rings, add the clasp at on end, and using just a jump ring attach the other end of the chain to the pendant.

If you wish to add the focal pearls on the clasp, drop 3 pearls on the headpin, turn a loop and attach to the jump ring.

 

Be flexible, enjoy and don’t get too hung up on neatness in wirework! Allow your creative juices to flow ………..

Happy Birthday Mummy!

Citrine & Moonstone strands
Citrine & Moonstone strands, rondelles and disks

So, its my mums birthday!

I wont mention her age but she loves long necklaces.

This was a JM Kit, purchased on the 1st April, 2015 on the Late show in which Fleur Hastings had a similar style necklace on air, my mum liked it so I got the “mini bundle”, coupled it with some wire left over from the Laura Binding Kit and made it more “friendly & wearable”, so less imposing, and easier to slip on and off without the need for a clasp.

Personally I prefer choker style ones, but given she has arthritis in her hands (and virtually every other part of her body) she does struggle with clasps and chains.

So whilst I know this creation would look amazing with a clasp on the end of the Moonstone & Citrine mix instead of the Gold Plated chain she wouldn’t wear it if I hadn’t added the chain!

IMG_5577
Jasper leaf, with Citrine & Moonstone 0.25mm Bronze wire for the Tiara weave, on 0.8mm Bronze coloured wire frame to make it more leafy, and Autumnal (ok its kind of out of season)
IMG_5598
Tiara weave on the Jasper leaf, with a bronze wire frame, Moonstone & Citrine necklace, and additional Gold Plated chain to make the piece a slip over your head instead of a clasp & hook piece owing to my mums struggle with arthritis

Jewellery Party – Happy Birthday

Jewellery Birthday Party
Jewellery Birthday Party

So last weekend we had a birthday party! A jewellery birthday party, 7 girls, all around 12 years old all wanting to make different things.

My basket was raided, absolutely raided, I took seed beads, elastic, silk cords, waxed cords, sari silks, general findings all sorts of jewellery items and the girls had such fun.

The creative juices were flowing, initially we all made a sari silk bracelet with a magnetic clasp, they each chose a silver finding to thread on, and then as the glue dried they moved on to threading seed beads on elastic or wire, they made rings, bracelets, choker necklace, long stringy necklaces, sari silk and seed bead hair grips each taking home several items, in a pretty fabric party bag.

The party was hosted by #craftybetty and some of the stringing materials we used were from #jewellerymaker, the silk was from #yarn-yarn, it was great to see the girls having fun and learning too.

IMG_5244 IMG_5245

Kit time! #jewellerymaker

 

this week I fancied trying a kit, but actually using the kit as suggested by JM, I selected this one, the vintage cuff kit inspired by Laura Binding.

My kit cost £24.95 + p&p

It contained, bronze coloured wire 0.80mm, 0.60mm and 0.25mm

Light Purple cultured poimagetato pearls 8x7mm

Bronze coated Pyrite rounds 6mm 

Lilac freshwater cultured pearl rice bead 7x5mm

Bronze potato pearls 3x2mm

I have never wire wrapped previously, and Laura’s opening lines are this is an advanced piece, oops maybe not a first attempt piece then!

So so I pull out the kit, set you tube up on the TV and off I go

Sewing and Lace workshop @ JM Towers

Sheila Davies with my lace and pearl piece
Sheila Davies with my lace and pearl piece
Pearl & Lace Collar Piece by Sheila Davies
Pearl & Lace Collar Piece by Sheila Davies

On Valentines day I got up ridiculously early, bag packed the night before, tool kit at the ready I had my travel tea cup filled, my breakfast bars on standby as I zoomed off in search of Redditch!

My destination was the Sewing and Pearls workshop, taught by Sheila Davies (resident designer at jewellery maker). I made it in plenty of time, not liking pearls nor lace this was going to be a challenge.

However, that is precisely the reason I decided to take the workshop, sometimes you learn more whilst working out of your comfort zone. My comfort zone is tiny beads, peyote, right angle weave, brick, albion, herringbone stitches and shortly the hubble stitch (watch this space but the awesome Bead School Mel has designed a new stitch, a book is being written as I type!) and french wirework beading.

Asymetrical Lace, Wire, Chain and Pearl Necklace by Sheila Davies
Asymetrical Lace, Wire, Chain and Pearl Necklace by Sheila Davies

I have been to Jewellery maker before, so the building, the layout was familiar to me, the workshop environment wasn’t. Previously I have only attended a sunday experience, I am desperately trying to get on another but try as I might I haven’t been successful yet ­čÖü

Fascinator with Pearls & Feathers by Sheila Davies
Fascinator with Pearls & Feathers by Sheila Davies

I was expecting a kit, demos, instructions, and finished items to view as inspiration pieces, interaction with other guest designers & presenters etc However, this wasn’t quite what the day turned out to be…….

Cabachon, & Gem pendants by Sheila Davies
Cabachon, & Gem pendants by Sheila Davies

I will say, Sheila is a wonderful lovely lady, who is kind, generous and incredibly helpful she allowed us the freedom and creativity to design our own pieces as the day progressed, I actually moved away from lace and on to Sari silk ribbon which I have to say I much prefer to work with. ┬áSheila, I love, she isn’t your conventional teacher, but she is a patient, and thought provoking one. As such there were no instructions, no detailed diagrams of the course objectives for the day but there were inspirational pieces. Including those I have pictured throughout this blog post.

Around the room she displayed her pieces, allowed us to use her stash of pearls, lace, needles etc without the need initially to dip into our “kits” which consisted of a strand of pearls, 2 backing pieces of material, monofilament, and pieces of white lace.

Lace, Soutache, Pearl, and Chain Hair Comb by Sheila Davies
Lace, Soutache, Pearl, and Chain Hair Comb by Sheila Davies

Sheila┬ádished out bead scoops, cut additional backing material up for us to use, gave us access to her pearl stash, quartz etc so I ended up making a piece that isn’t at all something I would of ever dreamt of creating, and then I moved on to creating (and am still creating) what I think will be my favourite piece using Sari silk ribbon and the bead scoop.

Pearl Bridal Collar by Sheila Davies @ JM
Pearl Bridal Collar by Sheila Davies @ JM

Another part of the course is the opportunity to meet the presenters and guest designers on the shows that day. I would love the opportunity to become a guest designer, sadly I suspect my area of specialism is too small & time consuming for JM, bead weaving is my passion, I love creating a bezel for a cab using peyote or albion stitch, adjusting the size of the beads to enable a tight secure bezel, cubic right angle weave, basic right angle weave (ladder weave to JM viewers) and much more, not all bead weaving needs to be done with tiny seed beads and personally I think there are many jewellery makers out in the big wide word who would love to learn a simple daisy stitch, create cubic weaves one day maybe my dream will come true!

I have to say some presenters & guest designers were much friendlier and lovely than they come across on the television, others sadly for whatever reason failed to acknowledge the workshop attendees, or if they did, it was glaringly obvious to several workshop attendees that the acknowledgement was done begrudgingly.

Pearl and Lace Hairpieces  by Sheila Davies
Pearl and Lace Hairpieces by Sheila Davies

Two of the presenters on Saturday were Ali Defoy, and Lucy Nicholls. Ali & Lucy are simply the loveliest, kindest friendliest most down to earth hilarious people I met on the day, along with the lovely Scott who was standing in for Wendy (workshop co-ordinator), and obviously Sheila. Each of these people took time out of their busy day to come into the workshop room, interact with the attendees, delight, encourage oooh and aaahhh over the our creations, share the delights of the strands which had been or were going on air.  This was before Ali went on air, & after Lucy had been on air, and then they popped back again a few hours later to make sure that they both the time to say goodbye to us, just as the lovely Elena had done when I met her on the Sunday experience last year.

Silk Sari Ribbon
Silk Sari Ribbon
Sari Silk & Gemstone Collar piece, designed by Fiona, inspired by Sheila Davies - work in progress
Sari Silk & Gemstone Collar piece, designed by Fiona, inspired by Sheila Davies – work in progress

During the day Sheila gave us an insight in to stiffening lace, staining white to an antique tea colour (using a tea bag!) and some of her design methodology. She virtually emptied her stash of lace encouraging us to take more pieces to create with, she willingly (or so it appeared) popped here there and everywhere looking for glue, wire mesh, sari silks, and other samples of products that we may not of used or tried previously.

I love teaching myself, but I also love taking┬áclasses. I am always looking to learn something new, the inspiration you can get from being around other jewellery designers makes for a vibrant buzzing atmosphere – I really would love to go again and learn something new, maybe a silver clay or wirework workshop next!

 

Weddings in the Air

Wedding Tiara
Wedding Tiara

What is a wedding without a Hen Party?

Well, the Great British Sewing Bee is back on the TV, Celebrity Great British Baker too, why not combine the two and book a Crafternoon Hen Party at one of several beautiful venues? You can learn to sew, make a tiara, make jewellery using precious gemstones or pearls, combined with afternoon tea, and then add on a spa trip, or overnight stay to make your weekend complete.

Do contact Michelle @ CraftyBetty for more information including how to book.

Crafty Betty
Crafty Betty

Fireline and tiny Gemstones

Fireline & 2mm Gemstones
Fireline & 2mm Gemstones

So, a quick glimpse at my beading board….notice I use a foam beading mat not a macrame board, or any other kind of board – the reason is that this beading mat at a cost of less than ┬ú1 holds the beads perfectly, quite how the “expert designers” on JM manage with a macrame board I have no idea, because when I try using on for basic beading my beads fly everywhere!

Anyway, I have drifted back to bead weaving, and really fancied using up some 2mm and 4mm rounds, so have a combination of quartz & jasper in various sizes on my board.

I decided to do a Cellini Spiral as this stitch looks amazing and is incredibly easy to learn, it’s basically a tubular peyote stitch but uses different sizes of beads so the end result is absolutely stunning.

To start the peyote, ideally you need 4 different colours of bead, ideally at least 2 of these are graduating in size, hence I used 2mm and 4 mm, the effect of this is that as the tube grows the beads appear to spiral.

The basic steps are to load 6 A beads, 2 B beads, 2 C beads, 2 D beads, 2 C beads and 2 D beads, take the thread back through the first 2 A beads and then step up, so the golden rule is quite simply which bead you are exiting, pick that up for the next stitch, so it’s a standard peyote. Go through a bead, pick up a bead, miss the bead and go through the next, thus producing an almost brick work effect once a couple of rows have been stitched.

Once you get round to the beginning, don’t just go through the next bead, but also go through the first bead added on the row you are just finishing, i.e. the step up, then continue adding beads as you spiral around. The pattern will commence quite quickly, but pay attention as it will be obvious if you get the wrong bead!

So I was busy beading away, ┬ámy fireline snapped ­čÖü beads fell everywhere ……..I needed the chocolate orange to console myself.

This was quite unexpected, as fireline is quite hard to cut – in fact I have a special pair of scissors just for wildfire and firemen. It will blunt normal snips & scissors as it’s quite a tough thread to use. These threads are thermally bonded,┬á┬átraditionally used by fishermen but my gemstones cut through the firemen …… so I have no picture to show you – however I won’t be defeated I will get some larger gemstones, and do the same but with a wire threading material. The end result won’t be a dainty, but should still have some impact, depending on how tight I can get the tension on the wire.

Watch this space!

 

HOT TIP ALERT!

When using wildfire or fireline you may find it tricky to get through the eye of the needle, if this is the case, use your flat nose pliers to squeeze the end of the thread, it will make it go flat which you can then turn on its side and slide thorough the needle eye ­čÖé

Craft Fairs

I have visited lots of craft fairs, I find them full of inspiration, and buzzing with creativity, I tend to associate them with tea and cake, being a summer time affair generally, but obviously there are the Christmas versions (still with tea and cake), the Easter ones (tea and chocolate cake) but I do find them frustratingly difficult to sell at.

So, the basics of a craft fair are that the seller is registered with HMRC, if not then there could be undeclared income issues to deal with, and trust me its really worth registering as Self Employed if you are looking to make money because the fines simply weigh the meagre amount of tax you would be paying ten, twenty fold.

You need Insurance, public liability, you don’t want anyone to trip up and fall on your table leg, break a finger nail & then put in a claim against you.

Contents / Stock insurance, sadly there are people in the world not as honest as others, not to mention should the heavens open and it rains on your parade, or the Earth develops a huge fault and your table vanishes in a crater before your very eyes!

Table layout needs to be eye-catching, multi layered and not cluttered. Pricing should be clear, as should a little information about the items you are selling, its pointless selling Genuine gemstones if the potential customers don’t know they are genuine, they could just think they are overpriced plastic or glass beads. ┬áOr perhaps its a hand crafted lampwork bead design, exquisite and totally unique.

Packaging should be simple, elegant or beautiful also, especially if the items are to be gifts, but not excessive – there is also the small chance you could charge for gift wrapping or you could throw that in as a deal clincher!

I am a huge advocate of the personal approach, smile, greet people, engage in banter and chit-chat, stand at the front of your stall proudly displaying your wares, have a story to tell about them so that a passing potential customer can form an association with the item to the point that they simply must buy it – whether it be the stone of their birth month, or that it matches the colours of their jacket. The story can include a tale of how the feature gem is only mined 2 months of the year, in freezing conditions where the miners struggle to mine enough stone to make them enough money to survive the sub-zero temperatures for the remainder of the year. How the stone is only mined from one mine in the entire world and that its drying up, or the story could be something as simple as how the design was featured in Tatler, or Tiffany’s blue book or its inspired by┬áthe necklace worn by the Mona Lisa – the physical item is only half the story in clinching the sale the balance is about the memories you can create around the piece. I can waffle forever if I need to, its easy because I am passionate about the Gems I own & collect, and the pieces I am inspired to make whether they be out of gemstones or seed beads.

I also find that a stallholder can have a huge amount of interaction with potential customers by demonstrating at their stall, but also by allowing the customer to have a go themselves, or request a custom piece. It’s truly satisfying to teach someone a new skill, I love demonstrating techniques, and discovering new techniques, stitches what works and what doesn’t with different types of beads and stringing material.

I found last year that loom band craze lent itself really well to this, and at spare table a couple of children soon had a crowd around them ooo’ing and aaaah’ing at their looming skills!

But now we come of to my big big huge massive bug bare, the big issue I have with craft fairs is that people love to look, touch, hold, gossip, but rarely part with any money.

Lets face it, the real draw of doing a fair is to make some money, now whether that be to reinvest in stock or treats for yourself at the fair or the sole source of your income without money is there any real point to exhibiting at a craft fair ?

I get constantly frustrated with guest designers on JM and the presenters when I hear the constant oooh ahhhh ooooh at the fantastic designs demonstrated on the inspiration (and the other shows) there is absolutely no doubt they are amazing, beautiful pieces of jewellery, but oooh that necklace could be sold for at least (with real emphasis on the “at least” part of that sentence) ┬ú50 what a bargain, or the banter where each piece of agate on a strand could be sold for at least ┬ú20 each making a profit of ┬ú160 come on buy them, why wouldn’t you its ridiculous not to purchase them …but seriously would you, go a craft fair and buy a necklace or any piece of jewellery from a stall holder for that kind of money?? I wouldn’t and I can see the value in the gemstones and the time taken to create the piece.

My point is not to be negative at all, it’s just that I have visited as buyer, and as a seller a variety of craft stalls, I have made many friends whilst at these fairs but each time I have done them I have barely covered my costs, certainly not if you factor in my time or effort involved in setting up, paying for the stall, paying the insurance, petrol, food / drink at the fair and asking around most sellers I have met do it for the social side, and rarely make money. I am sure they all have really good days, but in truth I think anyone who believes you can make a good consistent reliable living selling at craft fairs must be living in a cardboard box or on fantasy island, however if you do manage it please do share your selling secrets and best stall locations!